VOLM 50
.jpg)
.jpg)
This is the latest version of the India Mark Handpump. It features a completely redesigned Cylinder with only 2 Gun Metal Parts. It uses 50 mm riser pipes.It can be used for lifting water from a depth of 50 meters. The advantages of this pumps are:
• Lower Capital Cost due to riser pipe of 50 mm
• Simple cylinder assembly with only single gun metal component in each of the valves, hence no tools are required for maintenance of valves
• Riser Pipe Centralizers for correct alignment for pipes VLOM cylinder
• ncorporating the features of Mark III with cost effectiveness of Mark II
• Can be used for wells of 100mm wells
This pump is suitable for a depth of upto 50 meters..
RISER PIPE:65MM Nominal bore Galvanized Iron Pipes of medium class or µPVC with SS & GFRP. The following are hot-dip galvanized to prevent corrosion problems Head, Handle, Front Cover, Water Chamber and Stand.
• Lower Capital Cost due to riser pipe of 50 mm
• Simple cylinder assembly with only single gun metal component in each of the valves, hence no tools are required for maintenance of valves
• Riser Pipe Centralizers for correct alignment for pipes VLOM cylinder
• ncorporating the features of Mark III with cost effectiveness of Mark II
• Can be used for wells of 100mm wells
This pump is suitable for a depth of upto 50 meters..
VLOM 50
While India Mark 2 Hand pump is very widely used but is not VLOM and India Mark 3 is VLOM but is not so prevalent because of its 65 mm Riser Pipes having such a high cost , Perhaps the VLOM 50 Hand pump combines the best of both worlds since it is VLOM and uses riser Pipes of 50 mm Nominal Bore.RISER PIPE:65MM Nominal bore Galvanized Iron Pipes of medium class or µPVC with SS & GFRP. The following are hot-dip galvanized to prevent corrosion problems Head, Handle, Front Cover, Water Chamber and Stand.
